Showing posts with label pcb caulk. Show all posts
Showing posts with label pcb caulk. Show all posts

Tuesday, October 21, 2008

PCB Caulk Removal Contractor Services Nationwide

At one time caulk was manufactured to contain PCBs because they imparted flexibility. PCB-containing caulk was used as a joint sealant in various architectural applications, including around windows, and masonry expansion joints.

It is known that caulk containing polychlorinated biphenyls (PCBs) was used in some buildings, including schools, in the 1950s through the 1970s. Buildings built after 1980 are less likely to contain caulk that contains PCBs.

Caulk is a flexible material used to seal gaps to make windows, masonry and joints in buildings and other structures watertight or airtight. To date it has been found in buildings in the northeastern United States and in joints in concrete water storage basins in the western United States.

* If you believe the caulk in your school or building was manufactured before 1978, when PCBs were banned, you may wish to have the caulk tested by a chemical analysis laboratory.

* If PCBs are found in the caulk, avoid regular touching of the caulk, clean it up properly and safely, and make plans to remove the caulk.

* When PCB-containing caulk is removed and disposed of, it should be done with care to avoid contamination of surrounding materials such as floors, wood, bricks, mortar or soil.

The Mack Group, LLC offers Nationwide PCB Caulk Removal Services

The Mack Group, LLC offers a complete solution to your pcb caulk removal needs as well as asbestos removal, asbestos abatement, surveys, testing and sampling, and disposal.

Contact Information:

The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000
Fax: 973-759-5554
Web: http://www.mackgrp.com/
Email: sking@mackgrp.com

Sunday, August 17, 2008

PCBs in Caulk - Schumer Calls for EPA to Set Guidelines

The following are exerpts from a press releases from July 19, 2007 which readers might find relevant:

Schumer Calls On EPA To Drop Backbreaking Fines Against Yorktown School District And To Set Clear National Guidelines For Removal Of PCB-Laden Caulk

PCB in Caulk, which was Commonly Used in Construction Projects Prior to 1977, was Recently Located in Debris from Yorktown School Renovations

With the Environmental Protection Agency (EPA) threatening to unfairly levy backbreaking fines and penalties against the Yorktown Central School District, due to the discovery of PCB-laden caulk in renovation debris at a local school, today, U.S. Senator Charles E. Schumer urged the agency to refrain from imposing any fines. Five years ago, during renovations at the French Hill Elementary School, a piece of caulking debris was privately tested and found positive for polychlorinated biphenyl (PCBs), spurring the district to voluntarily remove large volumes of soil at a cost to taxpayers of $300,000.

Since that time, the EPA has threatened the Yorktown Central School District, without regulatory basis, with additional fines and penalties if it does not test additional caulking in the district for PCBs.

Today, Senator Schumer sent a letter to the EPA calling on it to refrain from threatening unfair fines against the school district and instead to set clear guidelines on removing PCB-laden caulk to assist school districts, like Yorktown, in cleaning up the material.

“The EPA has put the cart before the horse with regard to the Yorktown School District. You can’t follow the rules when the rulebook has not been written yet,” said Senator Schumer, who pointed out that no clear guidelines exist for removing PCB-laden caulk. “Common sense and fairness dictates that the EPA must refrain from imposing any fines against the Yorktown Central School District until it puts in place the necessary regulations for the removal of PCB-laden caulk. To my knowledge, no other school district in the state, or the country, is being asked to do the same.”

More than five years ago, the Yorktown District undertook a renovation project on its French Hill Elementary School. Following requirements and regulations established by the NYS Education Department, tests were conducted on the caulking material on the windows to be removed. Neither asbestos nor lead-containing materials were found, and the windows were disposed of as normal construction debris.

However, after new windows were installed, a local resident tested a piece of caulking debris and found it to contain the carcinogenic toxin, polychlorinated biphenyl (PCBs). The district then voluntarily and proactively removed large volumes of soil at a cost of $300,000, even though the New York State Education Department does not require school districts to identify or remediate PCBs during construction projects and EPA regulations do not speak to the issue.

Despite PCB-laden caulk being commonly used in construction projects prior to 1977, currently the EPA has no regulations on the removal of it. In his letter to EPA Administrator Stephen L. Johnson, Schumer also argued that the Yorktown School District violated no New York State Education Department standard in its handling of the matter. In fact, the Senator contended that the district should be credited for going beyond state requirements in dealing with pre-1977 construction materials.

After being contacted by Westchester County Legislator Michael Kaplowitz, and the Yorktown Central School District, Schumer sent an inquiry to the Environmental Protection Agency in May.

“I am baffled as to what grounds the EPA has for threatening fines,” Schumer continued. “And I am again calling on the EPA to promptly articulate clear, nationwide standards for the removal of PCB-laden caulk.”
###
Source: www.schumer.senate.gov/SchumerWebsite/pressroom/record.cfm?id=280411

Saturday, August 16, 2008

PCBs In Building Materials - Information and Removal Options

PCBs are no longer manufactured in the United States.

The Environmental Protection Agency requested information about the use and concentration of PCBs found in certain non-liquid PCB applications or products for the December 6,1994 Proposed rule

The following brief descriptions of non-liquid PCB use information submitted to EPA are taken from pages 69358-69364 [FR Doc. 99-32079]

Insulation (e.g., wool felt, foam rubber and fiberglass) and sound-dampening materials. These materials have been found to contain PCBs at concentrations which exceed 50 ppm. Fiberglass insulation containing PCBs has been found in federally owned buildings at various concentrations. Bulk PCB concentrations were reported to range between <1>

Plastics, small foam rubber and rubber parts, adhesive tape, and insulating materials used in electrical cabling.

Paint formulations

Fluorescent light ballast potting materials

Gaskets in heating, ventilation and air conditioning (HVAC) and other duct systems.

Coatings for ceiling tiles. Ceiling tiles contaminated with PCBs have been found at educational institutions with surface level PCB concentrations at a maximum of 53 ppm.

Flooring and floor wax/sealants.

Roofing and siding materials. This material was manufactured and marketed worldwide as Robertson Protected Metal (RPM) and Galbestos to airlines, railroads, chemical plants, steel mills, mines, industrial/manufacturing facilities, and military facilities.

Caulking and grout. Samples of caulking that have been contaminated with PCBs have been found in a setting previously used as a school at a maximum concentration of 310,000 ppm PCBs

Waterproofing compounds, anti-fouling compounds, and fire retardant coatings.

Coal-tar enamel coatings for steel water pipe and underground storage tanks

The Mack Group, LLC offers Nationwide PCB Contaminated Building Materials Removal Services

The Mack Group, LLC offers a complete solution to your PCB contaminated building materials abatement, remediation, removal and disposal requirements. We have the ability to professional abate these materials and dispose of the materials into an approved disposal facility. We also perform asbestos removal, asbestos abatement, surveys, testing and sampling, and disposal.

Feel free to contact us for consulting services or an estimate or proposal for your PCB contaminated building material removal project.

Contact Information:

The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000
Fax: 973-759-5554
Web: www.mackgrp.com
Email: sking@mackgrp.com

Some of the information on PCBs above was found at the source www.ecy.wa.gov/programs/hwtr/demodebris/pages2/demowasteother.html

Thursday, August 14, 2008

PCBs in Building Caulk and Removal Services

PCBs in Building Caulk

At one time caulk was manufactured to contain PCBs because they imparted flexibility. PCB-containing caulk was used as a joint sealant in various architectural applications, including around windows, and masonry expansion joints.

It is known that caulk containing polychlorinated biphenyls (PCBs) was used in some buildings, including schools, in the 1950s through the 1970s. Buildings built after 1980 are less likely to contain caulk that contains PCBs.

Caulk is a flexible material used to seal gaps to make windows, masonry and joints in buildings and other structures watertight or airtight. To date it has been found in buildings in the northeastern United States and in joints in concrete water storage basins in the western United States.

* If you believe the caulk in your school or building was manufactured before 1978, when PCBs were banned, you may wish to have the caulk tested by a chemical analysis laboratory.

* If PCBs are found in the caulk, avoid regular touching of the caulk, clean it up properly and safely, and make plans to remove the caulk.

* When PCB-containing caulk is removed and disposed of, it should be done with care to avoid contamination of surrounding materials such as floors, wood, bricks, mortar or soil.

The Mack Group, LLC offers Nationwide PCB Caulk Removal Services

The Mack Group, LLC offers a complete solution to your pcb caulk removal needs as well as asbestos removal, asbestos abatement, surveys, testing and sampling, and disposal.

Contact Information:

The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000
Fax: 973-759-5554
Web: http://www.mackgrp.com/
Email: sking@mackgrp.com

The MACK Group Successfully Completes Ahead of Schedule the Asbestos Abatement of 272 Rail Passenger Cars

The MACK Group Successfully Completes Ahead of Schedule the Asbestos Abatement of 272 Rail Passenger Cars.  This was the First Phase of a...