The Mack Group Provides Industrial and Commercial Mold Remediation Services Nationwide

Consider The MACK Group, LLC if you answer yes to any of the following questions regarding the presence of mold:

• Are there existing moisture problems in the building?
• Have building materials been wet more than 48 hours?
• Are there hidden sources of water or is the humidity too high (high enough to cause condensation)?
• Are building occupants reporting musty or moldy odors?
• Are building occupants reporting health problems?
• Are building materials or furnishings visibly damaged?
• Has maintenance been delayed or the maintenance plan been altered?
• Has the building been recently remodeled or has building use changed?

The MACK Group uses a variety of mold cleanup methods that may include:

• Wet Vacuum
• Damp Wipe
• HEPA Vacuum
• Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.

The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.

Please feel free to visit our website for more information on our company.

About The MACK Group, LLC

The Mack Group, LLC is an expert specialized contractor providing a wide range of services from asbestos removal and abatement to decontamination nationwide. We take great pride in our safety record and our commitment to meeting our client’s project schedules and monetary budgets. Our services include asbestos, mold and lead abatement and removal, industrial and pharmaceutical duct cleaning and biological and chemical remediation, and all types of concrete surface preparation and floor covering removal (shot blasting, terminator sales, etc.).

Contact Information:

The MACK Group, LLC – Corporate Main Office
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 877-759-MACK
Fax: 973-759-5554
Web: http://www.mackgrp.com/
Email: Steve King sking@mackgrp.com

How much does mold removal and remediation cost?

A typical question from clients is "How much does mold remediation, removal and cleanup cost?"

There is no set unit pricing for mold remediation, removal and cleanup. There are many factors that affect removal costs including materials that are mold infected (wood, plaster, flooring, etc.), geographic location, location of the mold (is it throughout the structure?, is it in the duct work?, is it behind the walls?), disposal and transportation costs.

The Mack Group, LLC has the expertise and experience to develop cost estimates for a simple mold removal abatement project to an entire facility wide mold removal project. We can provide a cost estimate as well as firm pricing and, of course, we can professionally and safely execute the actual mold abatement. We look forward to providing you consulting, estimating or contracting services on your next mold removal project.

Contact Information:

The MACK Group, LLC - Corporate Main Office
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000
Fax: 973-759-5554
Web: www.mackgrp.com

For more information contact: Steve King (973) 759-5000 or via email sking@mackgrp.com

Large Mold Remediation and Removal Project Completed By The Mack Group, LLC

The MACK Group, LLC recently completed a large mold and moisture remediation project for a Fortune 500 industrial client. The work was performed in response to moisture infiltration of building components which subsequently produced mold.

The MACK Group, LLC (MACK) was selected to perform the project based on their expert level of mold remediation and removal contractor services, their professional reputation, their attention to safety and schedule as well as their economical approach to mold removal services.

All mold removal work was performed in compliance with all applicable USEPA guidelines as described in the document “Mold Remediation in Schools and Commercial Buildings” and all ancillary OSHA standards pertaining to general contractor work practices. In order to provide minimal disturbance to the client’s on-going operations, work was performed during off hours and weekends.

The mold impact and mold growth was located along the perimeter walls and window wells of the building. These walls and wells were comprised of plaster on wire lathe. It is believed that mold growth resulted from leaks and or condensation from plumbing supplying the wall mounted HVAC systems in the window wells.

The remediation scope of work consisted of: Protection of all floor surfaces used for outside access utilizing 6 mil plastic sheeting and Masonite; Pre-cleaning of the work areas with HEPA vacuums to remove all pre-existing debris from floors, HVAC system covers and other horizontal surfaces; Isolation of the perimeter walls and window wells and venting of the work areas with HEPA filtered air filtration devices; installation of airtight polyethylene critical barriers over HVAC system covers within the window wells; Removal of visible mold growth by light sanding, scraping or use of nylon brushes; Application of a anti-microbial paint to the remediated surfaces; Post-remediation HEPA vacuum cleaning; Successfully passing final inspection and final air clearances.

Waste materials were bagged immediately, sealed and removed after each shift. These bagged materials were placed into covered carts which had to be transported carefully through the building to the waste dumpster. All wastes were properly disposed offsite.

The project was a complete success as it was accomplished on schedule, without injury or incident and within the client’s budget.

About The Mack Group, LLC

The MACK Group, LLC operates nationwide providing various contracting and consulting services. These services include asbestos abatement, asbestos consulting, asbestos removal, concrete surface preparation and floor covering removal services. The company also offers mold remediation, shot blasting, Blastrac and Terminator Floor preparation services and fluorescent bulb and ballast recycling services.

Contact Information

The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000 Fax: 973-759-5554
Web: www.mackgrp.com

For more information contact:

Steve King Email: sking@mackgrp.com

The Mack Group Provides Nationwide Mold Removal and Remediation Services

The MACK Group, LLC recently completed a large mold and moisture remediation project for a Fortune 500 industrial client. The work was performed in response to moisture infiltration of building components which subsequently produced mold.

The MACK Group, LLC (MACK) was selected to perform the project based on their expert level of mold remediation and removal contractor services, their professional reputation, their attention to safety and schedule as well as their economical approach to mold removal services.

All mold removal work was performed in compliance with all applicable USEPA guidelines as described in the document “Mold Remediation in Schools and Commercial Buildings” and all ancillary OSHA standards pertaining to general contractor work practices. In order to provide minimal disturbance to the client’s on-going operations, work was performed during off hours and weekends.

The mold impact and mold growth was located along the perimeter walls and window wells of the building. These walls and wells were comprised of plaster on wire lathe. It is believed that mold growth resulted from leaks and or condensation from plumbing supplying the wall mounted HVAC systems in the window wells.

The remediation scope of work consisted of: Protection of all floor surfaces used for outside access utilizing 6 mil plastic sheeting and Masonite; Pre-cleaning of the work areas with HEPA vacuums to remove all pre-existing debris from floors, HVAC system covers and other horizontal surfaces; Isolation of the perimeter walls and window wells and venting of the work areas with HEPA filtered air filtration devices; installation of airtight polyethylene critical barriers over HVAC system covers within the window wells; Removal of visible mold growth by light sanding, scraping or use of nylon brushes; Application of a anti-microbial paint to the remediated surfaces; Post-remediation HEPA vacuum cleaning; Successfully passing final inspection and final air clearances.

Waste materials were bagged immediately, sealed and removed after each shift. These bagged materials were placed into covered carts which had to be transported carefully through the building to the waste dumpster. All wastes were properly disposed offsite.

The project was a complete success as it was accomplished on schedule, without injury or incident and within the client’s budget.

About The Mack Group, LLC

The MACK Group, LLC operates nationwide providing various contracting and consulting services. These services include asbestos abatement, asbestos consulting, asbestos removal, concrete surface preparation and floor covering removal services. The company also offers mold remediation, shot blasting, Blastrac and Terminator Floor preparation services and fluorescent bulb and ballast recycling services.

Contact Information

The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000 Fax: 973-759-5554
Web: www.mackgrp.com

For more information contact:

Steve King Email: sking@mackgrp.com

Mold Remediation, Removal and Cleanup Contractors Services

The Mack Group, LLC are experts in mold remediation, cleanup and mold removal.

Our mold remediation contractor services include:

• Black Mold Removal
• Mold Inspections
• Mold Abatement
• Mold Removal
• Interior Demolition

Please contact us for an estimate, quotation or bid.

Nationwide Mold Remediation Removal Contractor Services

We offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)

For more information visit our website at http://www.mackgrp.com/

The MACK Group, LLC Completes Industrial Mold Remediation Project

The MACK Group, LLC recently completed a large mold and moisture remediation project for a Fortune 500 industrial client. The work was performed in response to moisture infiltration of building components which subsequently produced mold. The MACK Group, LLC (MACK) was selected to perform the project based on their expert level of mold remediation and removal contractor services, their professional reputation, their attention to safety and schedule as well as their economical approach to mold removal services.

All mold removal work was performed in compliance with all applicable USEPA guidelines as described in the document “Mold Remediation in Schools and Commercial Buildings” and all ancillary OSHA standards pertaining to general contractor work practices. In order to provide minimal disturbance to the client’s on-going operations, work was performed during off hours and weekends.

The mold impact and mold growth was located along the perimeter walls and window wells of the building. These walls and wells were comprised of plaster on wire lathe. It is believed that mold growth resulted from leaks and or condensation from plumbing supplying the wall mounted HVAC systems in the window wells.

The remediation scope of work consisted of: Protection of all floor surfaces used for outside access utilizing 6 mil plastic sheeting and Masonite; Pre-cleaning of the work areas with HEPA vacuums to remove all pre-existing debris from floors, HVAC system covers and other horizontal surfaces; Isolation of the perimeter walls and window wells and venting of the work areas with HEPA filtered air filtration devices; installation of airtight polyethylene critical barriers over HVAC system covers within the window wells; Removal of visible mold growth by light sanding, scraping or use of nylon brushes; Application of a anti-microbial paint to the remediated surfaces; Post-remediation HEPA vacuum cleaning; Successfully passing final inspection and final air clearances.

Waste materials were bagged immediately, sealed and removed after each shift. These bagged materials were placed into covered carts which had to be transported carefully through the building to the waste dumpster. All wastes were properly disposed offsite.
The project was a complete success as it was accomplished on schedule, without injury or incident and within the client’s budget.

About The Mack Group, LLC

The MACK Group, LLC operates nationwide providing various contracting and consulting services. These services include asbestos abatement, asbestos consulting, asbestos removal, concrete surface preparation and floor covering removal services. The company also offers mold remediation, shot blasting, Blastrac and Terminator Floor preparation services and fluorescent bulb and ballast recycling services.

Contact Information

The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000
Fax: 973-759-5554
Web: www.MACKgrp.com

For more information contact:
Steve King (973) 759-5000 ext. 302
Email: sking@mackgrp.com