The MACK Group, LLC recently completed a large mold and moisture remediation project for a Fortune 500 industrial client. The work was performed in response to moisture infiltration of building components which subsequently produced mold.
The MACK Group, LLC (MACK) was selected to perform the project based on their expert level of mold remediation and removal contractor services, their professional reputation, their attention to safety and schedule as well as their economical approach to mold removal services.
All mold removal work was performed in compliance with all applicable USEPA guidelines as described in the document “Mold Remediation in Schools and Commercial Buildings” and all ancillary OSHA standards pertaining to general contractor work practices. In order to provide minimal disturbance to the client’s on-going operations, work was performed during off hours and weekends.
The mold impact and mold growth was located along the perimeter walls and window wells of the building. These walls and wells were comprised of plaster on wire lathe. It is believed that mold growth resulted from leaks and or condensation from plumbing supplying the wall mounted HVAC systems in the window wells.
The remediation scope of work consisted of: Protection of all floor surfaces used for outside access utilizing 6 mil plastic sheeting and Masonite; Pre-cleaning of the work areas with HEPA vacuums to remove all pre-existing debris from floors, HVAC system covers and other horizontal surfaces; Isolation of the perimeter walls and window wells and venting of the work areas with HEPA filtered air filtration devices; installation of airtight polyethylene critical barriers over HVAC system covers within the window wells; Removal of visible mold growth by light sanding, scraping or use of nylon brushes; Application of a anti-microbial paint to the remediated surfaces; Post-remediation HEPA vacuum cleaning; Successfully passing final inspection and final air clearances.
Waste materials were bagged immediately, sealed and removed after each shift. These bagged materials were placed into covered carts which had to be transported carefully through the building to the waste dumpster. All wastes were properly disposed offsite.
The project was a complete success as it was accomplished on schedule, without injury or incident and within the client’s budget.
About The Mack Group, LLC
The MACK Group, LLC operates nationwide providing various contracting and consulting services. These services include asbestos abatement, asbestos consulting, asbestos removal, concrete surface preparation and floor covering removal services. The company also offers mold remediation, shot blasting, Blastrac and Terminator Floor preparation services and fluorescent bulb and ballast recycling services.
Contact Information
The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000 Fax: 973-759-5554
Web: www.mackgrp.com
For more information contact:
Steve King Email: sking@mackgrp.com
Showing posts with label mold removal. Show all posts
Showing posts with label mold removal. Show all posts
Monday, November 24, 2008
Sunday, September 14, 2008
Mold Remediation, Removal and Cleanup Contractors Services
The Mack Group, LLC are experts in mold remediation, cleanup and mold removal.
Our mold remediation contractor services include:
We offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
For more information visit our website at http://www.mackgrp.com/
Our mold remediation contractor services include:
- Black Mold Removal
- Mold Inspections
- Mold Abatement
- Mold Removal
- Interior Demolition
Please contact us for an estimate, quotation or bid.
Nationwide Mold Remediation Removal Contractor ServicesWe offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
For more information visit our website at http://www.mackgrp.com/
Wednesday, June 25, 2008
Mold Remediation and Mold Removal Services by The MACK Group, LLC
The Mack Group, LLC are experts in mold remediation and mold removal.
Our mold remediatio services include:
We offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
For more information visit our website at www.mackgrp.com
Our mold remediatio services include:
- Black Mold Removal
- Mold Inspections
- Mold Abatement
- Mold Removal
- Interior Demolition
We offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
For more information visit our website at www.mackgrp.com
Friday, June 6, 2008
Mold Remediation and Mold Removal Services by The MACK Group, LLC
The Mack Group, LLC is an expert mold remediation and abatement contractor
Mold Remediation Basics
The purpose of mold remediation is to remove the mold to prevent human exposure and damage to building materials and furnishings.
It is necessary to clean up mold contamination, not just to kill the mold.
Dead mold is still allergenic, and some dead molds are potentially toxic.
The MACK Group, LLC considers the following questions when planning the remediation of mold:
Are there existing moisture problems in the building?
Have building materials been wet more than 48 hours?
Are there hidden sources of water or is the humidity too high (high enough to cause condensation)?
Are building occupants reporting musty or moldy odors?
Are building occupants reporting health problems?
Are building materials or furnishings visibly damaged?
Has maintenance been delayed or the maintenance plan been altered?
Has the building been recently remodeled or has building use changed?
Is consultation with medical or health professionals indicated?
Mold Remediation Means and Methods
A variety of mold cleanup methods are available for remediating damage to building materials and furnishings caused by moisture control problems and mold growth. This may include:
Wet Vacuum
Damp Wipe
HEPA Vacuum
Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.
The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.
Remediation and Cleanup Final Steps
The MACK Group, LLC makes sure the mold remediation is complete by:
Making sure the water or moisture problem is completely fixed.
Use of professional judgment to determine if the cleanup is sufficient. Visible mold, mold-damaged materials, and moldy odors will not be present.
Via air sampling, the kinds and concentrations of mold and mold spores in the building should be similar to those found outside, once cleanup activities have been completed.
We revisit the site(s) shortly after remediation to look for signs of water damage or mold growth.
The clients personnel and tenants will be able to occupy or re-occupy the space without health complaints or physical symptoms.
Nationwide Mold Remediation Removal Contractor Services
We offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
www.mackgrp.com
Mold Remediation Basics
The purpose of mold remediation is to remove the mold to prevent human exposure and damage to building materials and furnishings.
It is necessary to clean up mold contamination, not just to kill the mold.
Dead mold is still allergenic, and some dead molds are potentially toxic.
The MACK Group, LLC considers the following questions when planning the remediation of mold:
Are there existing moisture problems in the building?
Have building materials been wet more than 48 hours?
Are there hidden sources of water or is the humidity too high (high enough to cause condensation)?
Are building occupants reporting musty or moldy odors?
Are building occupants reporting health problems?
Are building materials or furnishings visibly damaged?
Has maintenance been delayed or the maintenance plan been altered?
Has the building been recently remodeled or has building use changed?
Is consultation with medical or health professionals indicated?
Mold Remediation Means and Methods
A variety of mold cleanup methods are available for remediating damage to building materials and furnishings caused by moisture control problems and mold growth. This may include:
Wet Vacuum
Damp Wipe
HEPA Vacuum
Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.
The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.
Remediation and Cleanup Final Steps
The MACK Group, LLC makes sure the mold remediation is complete by:
Making sure the water or moisture problem is completely fixed.
Use of professional judgment to determine if the cleanup is sufficient. Visible mold, mold-damaged materials, and moldy odors will not be present.
Via air sampling, the kinds and concentrations of mold and mold spores in the building should be similar to those found outside, once cleanup activities have been completed.
We revisit the site(s) shortly after remediation to look for signs of water damage or mold growth.
The clients personnel and tenants will be able to occupy or re-occupy the space without health complaints or physical symptoms.
Nationwide Mold Remediation Removal Contractor Services
We offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
www.mackgrp.com
Thursday, May 15, 2008
The MACK Group, LLC provides mold remediation and cleanup contracting services
Mold Remediation Basics
The purpose of mold remediation is to remove the mold to prevent human exposure and damage to building materials and furnishings.
It is necessary to clean up mold contamination, not just to kill the mold.
Dead mold is still allergenic, and some dead molds are potentially toxic.
Mold Remediation Planning
The MACK Group, LLC considers the following questions when planning the remediation of mold:
* Are there existing moisture problems in the building?
* Have building materials been wet more than 48 hours?
*Are there hidden sources of water or is the humidity too high (high enough to cause condensation)?
*Are building occupants reporting musty or moldy odors?
* Are building occupants reporting health problems?
* Are building materials or furnishings visibly damaged?
* Has maintenance been delayed or the maintenance plan been altered?
* Has the building been recently remodeled or has building use changed?
* Is consultation with medical or health professionals indicated?
Mold Remediation Means and Methods
A variety of mold cleanup methods are available for remediating damage to building materials and furnishings caused by moisture control problems and mold growth. This may include:
Wet Vacuum
Damp Wipe
HEPA Vacuum
Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.
The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.
Remediation and Cleanup Final Steps
The MACK Group, LLC makes sure the mold remediation is complete by:
* Making sure the water or moisture problem is completely fixed.
* Use of professional judgment to determine if the cleanup is sufficient. Visible mold, mold-damaged materials, and moldy odors will not be present.
* Via air sampling, the kinds and concentrations of mold and mold spores in the building should be similar to those found outside, once cleanup activities have been completed.
* We revisit the site(s) shortly after remediation to look for signs of water damage or mold growth.
* The clients personnel and tenants will be able to occupy or re-occupy the space without health complaints or physical symptoms.
Nationwide Mold Remediation Removal Contractor Services
We offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
source WWW.MACKGRP.COM
Subscribe to:
Posts (Atom)
The MACK Group Successfully Completes Ahead of Schedule the Asbestos Abatement of 272 Rail Passenger Cars
The MACK Group Successfully Completes Ahead of Schedule the Asbestos Abatement of 272 Rail Passenger Cars. This was the First Phase of a...
