Glossary of Asbestos Abatement and Asbestos Removal Terms and Terminology

For your information, The MACK Group, LLC has compiled the following glossary of asbestos abatement and removal terms and terminology to assist our clients.

AHERA - The Asbestos Hazard Emergency Response Act, passed by Congress in 1986

CERCLA - The Comprehensive Environmental Response Compensation and Liability Act which is alsoo known as the "Superfund."

EPA - The United States Environmental Protection Agency

EHSD - Environmental Health and Safety Division, U.S. EPA

Friable Asbestos Material - Any material containing more than one percent asbestos, as determined using the method specified in Appendix A, subpart F 40 CFR part 763, section 1, Polarized Light Microscopy, that when dry, can be crumbled, pulverized, or reduced to powder by hand pressure. If the asbestos content is less than 10 percent as determined by a method other than point counting by polarized light microscopy (PLM), verify the asbestos by point counting using PLM.

Glovebag - A sealed compartment with attached inner gloves used for the handling of asbestos- containing materials.

NARS - National Asbestos Registry System

Negative pressure enclosure - means any enclosure of an asbestos abatement project area where the air pressure outside the enclosure is greater than the air pressure inside the enclosure and the air inside the enclosure is changed at least four times an hour by exhausting it through a HEPA filter.

NESHAP - The National Emission Standard for Hazardous Air Pollutants found in Title 40 CFR Part 61 promulgated under Section 112 of the Clean Air Act.

NIOSH - National Institute for Occupational Safety and Health

NVLAP - National Voluntary Laboratory Accreditation Program

OSHA - Occupational Safety & Health Administration

PLM - Polarized light microscopy, as defined in Appendix A, subpart F, 40 CFR part 763, section 1

RACM - Regulated Asbestos-Containing Material. RACM means (a) Friable asbestos material, (b) Category I nonfriable ACM that has become friable, (c) Category I nonfriable ACM that will be or has been subjected to sanding, grinding, cutting, or abrading, or (d) Category II nonfriable ACM that has a high probability of becoming or has become crumbled, pulverized, or reduced to powder by the forces expected to act on the material in the course of demolition or renovation operations regulated by the Asbestos NESHAP.

RCRA - Resource Conservation and Recovery Act

TSCA - Toxic Substances Control Act

Visible Emissions - Any emissions, which are visually detectable without the aid of instruments, coming from RACM or asbestos- containing waste material, or from any asbestos milling, manufacturing, or fabricating operation.

OTHER TERMS

Asbestos Abatement Project - means any demolition, renovation, repair, construction or maintenance activity of any public or private facility that involves the repair, enclosure, encapsulation, removal, salvage, handling, or disposal of any asbestos-containing material (ACM) with the potential of releasing asbestos fibers from asbestos-containing material into the air.

Asbestos Abatement Worker - means any employee of a licensed asbestos contractor who engages in asbestos abatement, has completed a training program approved by the governing agency and has been issued a certificate by that agency.

Asbestos Abatement Site Supervisor - means any asbestos abatement worker employed by a licensed asbestos contractor who has been specifically trained as a supervisor in a training program approved by the governing agency and who has been issued a certificate by that agency.

SOURCE: www.mackgrp.com/asbestos_terms.html

Asbestos Management and Asbestos Survey Services Nationwide by The Mack Group, LLC

Asbestos Management and Asbestos Survey Services

The MACK Group, LLC is a profesional and licensed asbestos abatement, management and survey company. Our ACM management and asbestos survey services are provided across the United States. We conduct the initial investigation to determine extent, quantities and locations of asbestos containing materials to develop a comprehensive approach for asbestos abatement services. This may include:

• Develop budgetary estimates or firm proposals for your asbestos and demolition projects.
• Initial asbestos survey
• Asbestos sampling
• Development of asbestos health and safety and work plan
• Management of actual asbestos abatement, demolition and related services
• Tracking and compilation of all asbestos waste manifests
• Final report detailing and compiling abatement activities and documentation

Nationwide Services

The MACK Group, LLC. offers these services within the United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL).

The MACK Group, LLC Completes Commercial Asbestos Removal Project at Mall in NJ

The MACK Group, LLC, a premier asbestos abatement and flooring removal contractor, recently completed a commercial asbestos abatement project that consisted of the removal of asbestos floor tile and mastic. The project was performed at a Mall in New Jersey.

Prior to asbestos abatement activities, a 10 day notification was submitted which is a written notification of intention to perform asbestos abatement in accordance with 40 CFR 61.145 to 61.155 and N.J.A.C. 7:26-2.12(d) and (e). All utilities were also disconnected. The project conformed to all OSHA and EPA regulations pertaining to ACM and only NJ licensed asbestos abatement workers performed the asbestos removal work.

The MACK Group, LLC (MACK) was contracted to remove and abate asbestos containing floor tile and mastic that was adhered to a concrete floor. The estimated quantity of asbestos containing floor tile and mastic that needed to be abated and removed was 10,000 square feet.

To remove the asbestos floor tile and mastic, MACK used a combination of proprietary flooring removal machines that they own in their fleet of abatement equipment. The flooring removal machines have zero emissions and fumes allowing for use in restricted ventilation areas. These machines allowed MACK to easily remove the floor tile and mastic down to the original concrete floor surface without damaging the existing concrete.

The transportation of the removed asbestos floor tile and mastic was in accordance with N.J.A.C. 7:26-3.5(d) and by registered New Jersey solid waste vehicles. ACM was then properly disposed at an EPA licensed landfill.

Finally, all required OSHA air monitoring, notifications, and all required final air testing was conducted.

The project was completed without incident or injury.

About The MACK Group, LLC

The Mack Group, LLC is one of the premier contractors in the United States offering nationwide services including asbestos abatement, asbestos removal, flooring removal, shot-blasting, mold remediation, demolition, decontamination, lead abatement, duct cleaning, biological/chemical remediation and more.

Contact Information:

The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034

Tel: 973-759-5000
Fax: 973-759-5554
Web: www.mackgrp.com
For more information contact:

Stephen King (973) 759-5000
sking@mackgrp.com

The MACK Group, LLC provides mold remediation and cleanup contracting services

Mold Remediation Basics

The purpose of mold remediation is to remove the mold to prevent human exposure and damage to building materials and furnishings.
It is necessary to clean up mold contamination, not just to kill the mold.
Dead mold is still allergenic, and some dead molds are potentially toxic.

Mold Remediation Planning

The MACK Group, LLC considers the following questions when planning the remediation of mold:


* Are there existing moisture problems in the building?
* Have building materials been wet more than 48 hours?
*Are there hidden sources of water or is the humidity too high (high enough to cause condensation)?
*Are building occupants reporting musty or moldy odors?
* Are building occupants reporting health problems?
* Are building materials or furnishings visibly damaged?
* Has maintenance been delayed or the maintenance plan been altered?
* Has the building been recently remodeled or has building use changed?
* Is consultation with medical or health professionals indicated?

Mold Remediation Means and Methods

A variety of mold cleanup methods are available for remediating damage to building materials and furnishings caused by moisture control problems and mold growth. This may include:


Wet Vacuum
Damp Wipe
HEPA Vacuum
Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.

The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.

Remediation and Cleanup Final Steps

The MACK Group, LLC makes sure the mold remediation is complete by:

* Making sure the water or moisture problem is completely fixed.
* Use of professional judgment to determine if the cleanup is sufficient. Visible mold, mold-damaged materials, and moldy odors will not be present.
* Via air sampling, the kinds and concentrations of mold and mold spores in the building should be similar to those found outside, once cleanup activities have been completed.
* We revisit the site(s) shortly after remediation to look for signs of water damage or mold growth.
* The clients personnel and tenants will be able to occupy or re-occupy the space without health complaints or physical symptoms.

Nationwide Mold Remediation Removal Contractor Services

We offer our remediation services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
source WWW.MACKGRP.COM

The Mack Group,, LLC Offers Flooring Removal and Concrete Surface Preparation

The MACK Group, LLC are specialists in flooring removal and concrete surface preparation services. We provide these flooring removal contractor services using the latest ride-on flooring removal and shot blaster equipment. Flooring removal or preparation is completely performed using mechanical methods and no chemicals. Our trained employees and hi-tech equipment have the power to get the job done at a fraction of the time and expense associated with conventional methods.

We Can Remove:

• Carpet and Carpet Tile
• Linoleum and Floor Tile
• Epoxy, Elastomeric and Rubberized Coatings
• Asbestos Floor Tile
• Sports Floors / Gym Floors
• Hardwood Flooring
• Stone and Ceramic

And much more...

For more information visit www.mackgrp.com

The MACK Group, LLC Provides Nationwide Surface Preparation Contractor Services

The Mack Group, LLC provides nationwide surface preparation contractor services for industrial or commercial clientele.

We are an expert in flooring removal, abrasive blasting, shot blasting and waterblasting. We have the ability to remove:

• Carpet and Carpet Tile


• Linoleum and Floor Tile


• Epoxy, Elastomeric and Rubberized Coatings


• Asbestos Floor Tile


• Sports Floors / Gym Floors


• Hardwood Flooring


• Stone and Ceramic and much more...

Types of Surface Preparation Methods include:

• Shot Blasting


• Blastrac Floor Preparation


• Asbestos Floor Tile and Mastic Removal


• Abrasive Blast Cleaning


• Terminator Flooring Removal and Floor Preparation


• Chemical Stripping

We provide these surface preparation contractor services on a NATIONWIDE basis including New Jersey (NJ), Pennsylvania (PA), New York (NY), Delaware (DE), Massachussets (MA) and more.. For more information visit http://www.mackgrp.com/

SOURCE http://www.mackgrp.com/

The MACK Group, LLC Completes Decontamination of Chemical Dusts Project

The MACK Group, LLC, a premier asbestos abatement, decontamination and flooring removal contractor recently completed the decontamination, demolition and removal of 2 dryers from an active Fortune 500 pharmaceutical facility.

The Mack Group, LLC utilized a crew of five trained and safety conscientious technicians to first setup a dust barrier system. The dust barrier system, which consisted on polyethylene sheeting and negative air machines and ductwork, was necessary to prevent the migration of contaminated dusts from the work area into the active clean areas of the facility.
Once the dust controls were in place, decontamination of the dryer units was commenced. The chemical powders and dusts that were still in and on the units were vacuumed from the units and properly containerized. The containers of collected chemical materials were then handed over to the client for proper disposal and recycling.

Once the equipment was decontaminated, both units were then demolished and removed from the facility. Due to door way and access routes the equipment had to be processed into small pieces to facilitate removal from the facility. The demolished equipment pieces were then sent offsite for scrap metal recycling.

The project was completed in approximately one week without incident or injury.

About The MACK Group, LLC

The Mack Group, LLC is one of the premier contractors in the United States offering nationwide services including asbestos abatement, asbestos removal, flooring removal, shot-blasting, mold remediation, interior demolition, lead abatement, duct cleaning, biological/chemical remediation and more.

Contact Information:

The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000
Fax: 973-759-5554
Web: http://www.mackgrp.com/

For more information contact:
Stephen King (973) 759-5000 ext. 302
sking@mackgrp.com

Surface Preparation Contractor Services by The Mack Group, LLC

The Mack Group, LLC provides nationwide surface preparation contractor services for industrial or commercial clientele. We are an expert in flooring removal, abrasive blasting, shot blasting and waterblasting.

We have the ability to remove:

• Carpet and Carpet Tile
• Linoleum and Floor Tile
• Epoxy, Elastomeric and Rubberized Coatings
• Asbestos Floor Tile
• Sports Floors / Gym Floors
• Hardwood Flooring
• Stone and Ceramic
  And much more...
  

Types of Surface Preparation Methods include:

• Shot Blasting / Blastrac Floor Preparation
• Asbestos Floor Tile and Mastic Removal
• Abrasive Blast Cleaning
• Terminator Flooring Removal and Floor Preparation
• Chemical Stripping

We provide these surface preparation contractor services on a NATIONWIDE basis including New Jersey (NJ), Pennsylvania (PA), New York (NY), Delaware (DE), Massachussets (MA) and more..

For more information, visit our website at www.mackgrp.com

Asbestos Removal and Abatement Contractor Services

The MACK Group, LLC provides complete asbestos removal and abatement services:

Asbestos Management and Asbestos Survey Services

Conduct initial investigation to determine extent, quantities and locations of asbestos containing materials to develop a comprehensive approach for asbestos abatement services. This may include:

* Develop budgetary estimates or firm proposals for your asbestos and demolition projects.
* Initial asbestos survey
* Asbestos sampling
* Development of asbestos health and safety and work plan
* Management of actual asbestos abatement, demolition and related services
* Tracking and compilation of all asbestos waste manifests
* Final report detailing and compiling abatement activities and documentation

Asbestos Abatement and Removal Services

Asbestos abatement removal services include:

* Abatement of Asbestos Containing Materials (ACM)
* Transite removal
* Asbestos roof removal
* Asbestos tile removal
* Asbestos siding removal
* Asbestos insulation removal
* Asbestos containing material transportation and disposal

Asbestos Encapsulation

An alternative to asbestos removal is encapsulation. Asbestos containing material encapsulation basically consists of laminating or covering over the surface of the ACM with new materials or painted coatings.

We perform all of the above services typically for industrial (manufacturing, pharmaceutical, chemical, etc.) and commercial (office building, warehouse, etc.) clients.

Nationwide Asbestos Removal Contractor Services

The MACK Group, LLC offers these abatement services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)

Flooring Removal and Surface Preparation Contractor Services

The MACK Group, LLC are specialists in flooring removal and concrete surface preparation services. We provide these flooring removal contractor services using the latest ride-on flooring removal and shot blaster equipment. Flooring removal or preparation is completely performed using mechanical methods and no chemicals. Our trained employees and hi-tech equipment have the power to get the job done at a fraction of the time and expense associated with conventional methods.

We Can Remove:

• Carpet and Carpet Tile
• Linoleum and Floor Tile
• Epoxy, Elastomeric and Rubberized Coatings
• Asbestos Floor Tiles
• Sports Floors / Gym Floors
• Hardwood Flooring
• Stone and Ceramic
• And much more...

We have the ability to perform small projects but specialize in large commercial and industrial floor removal or surface preparation projects. Visit our website for more information.

Source: www.mackgrp.com